STUDYING THE DYNAMIC CHARACTERISTICS TO LENGTHEN THE OPERATING LIFE FOR A DIESEL ENGINE USING FREQUENCY RESPONSE FUNCTION (FRF) MEASUREMENT

Subekti Subekti

Abstract


This research was conducted on Diesel engine single cylinder which aims to study the dynamic characteristics of Diesel engine type HATZ 1D 80 made in Germany. The test was performed by measuring the Frequency Response Function (FRF). In this study, the vibration response was measured at three points: point A which was situated below the engine shaft and in line with the stinger. Point A indicated the FRF point. Point B was located in the valve train component, while point C was situated above the cap of the valve train component. The range of frequencies applied was 0 - 3200 Hz, 3200 - 6400 Hz, 6400 - 9600 Hz, and 9600 - 11200 Hz. This research indicates that the natural frequencies arose because of the global vibration mode. The global vibration mode occurred at natural frequencies of 3118, 4805, 4821, 5021, 7129, 8601, and 11107 Hz. While other natural frequencies were associated with the local vibration mode because it appears only at one point of measurement.


Keywords


Dynamic Characteristics; Diesel engine; FRF; Stinger; Vibration mode.

Full Text:

PDF


DOI: http://dx.doi.org/10.22441/sinergi.2018.3.004

Refbacks

  • There are currently no refbacks.


SINERGI
Fakultas Teknik Universitas Mercu Buana
Jl. Raya Meruya Selatan, Kembangan, Jakarta 11650
Tlp./Fax: +62215871335
p-ISSN: 1410-2331
e-ISSN: 2460-1217
http://publikasi.mercubuana.ac.id/index.php/sinergi

 

Creative Commons License
Journal by SINERGI is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View My Stats

 

The Journal is Indexed and Journal List Title by: